Metra Electronics 95-2009 Manuel d'utilisateur télécharger pdf (Page 31)

Kit Assembly 99-2009

4. Slidetheaftermarketheadunitintothecageandsecure.(FigureD)

 Note: (1) For the Buick LeSabre, Oldsmobile Aurora and the Pontiac Bonneville

the (3) speed clips and screws provided with the kit will need to be installed into

the sub dash where the screw holes line up on the kit.

(2) A snap-in DIN spacer has been provided for some applications where

depth is an issue. Snap the spacer in the housing and slide DIN cage into the

assembly and secure by bending metal locking tabs down. (FigureE)

5. Locatethefactorywiringharnessinthedash.Metrarecommendsusingthe

propermatingadapterfromMetraorAXXESS.Re-connectthenegativebattery

terminalandtesttheunitforproperoperation.

6. Reassembledashinreverseorderofdisassembly.

Double DIN radio provision with pocket

(Figure D) (Figure E)

Notes

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 63 64

Pas de commentaire

Metra Electronics 95-2009 Manuel d'utilisateur Page 31